Horton
Menu

Thread

  1. pgsql: Add TCP keepalive support to libpq.

    Robert Haas <rhaas@postgresql.org> — 2010-06-23T21:54:14Z

    Log Message:
-----------
Add TCP keepalive support to libpq.

This adds four additional connection parameters to libpq: keepalives,
keepalives_idle, keepalives_count, and keepalives_interval.
keepalives default to on, per discussion, but can be turned off by
specifying keepalives=0.  The remaining parameters, where supported,
can be used to adjust how often keepalives are sent and how many
can be lost before the connection is broken.

The immediate motivation for this patch is to make sure that
walreceiver will eventually notice if the master reboots without
closing the connection cleanly, but it should be helpful in other
cases as well.

Tollef Fog Heen, Fujii Masao, and me.

Modified Files:
--------------
    pgsql/doc/src/sgml:
        libpq.sgml (r1.308 -> r1.309)
        (http://anoncvs.postgresql.org/cvsweb.cgi/pgsql/doc/src/sgml/libpq.sgml?r1=1.308&r2=1.309)
    pgsql/src/interfaces/libpq:
        fe-connect.c (r1.393 -> r1.394)
        (http://anoncvs.postgresql.org/cvsweb.cgi/pgsql/src/interfaces/libpq/fe-connect.c?r1=1.393&r2=1.394)
        libpq-int.h (r1.150 -> r1.151)
        (http://anoncvs.postgresql.org/cvsweb.cgi/pgsql/src/interfaces/libpq/libpq-int.h?r1=1.150&r2=1.151)

  2. Re: [COMMITTERS] pgsql: Add TCP keepalive support to libpq.

    Simon Riggs <simon@2ndquadrant.com> — 2010-06-24T07:10:57Z

    On Wed, 2010-06-23 at 21:54 +0000, Robert Haas wrote:
> Log Message:
> -----------
> Add TCP keepalive support to libpq.

I misunderstood the earlier discussion on this and didn't realise you
were considering committing in this way. For me, this is two patches,
not one. I object to one and like the other.

> This adds four additional connection parameters to libpq: keepalives,
> keepalives_idle, keepalives_count, and keepalives_interval.
> keepalives default to on, per discussion, but can be turned off by
> specifying keepalives=0.  The remaining parameters, where supported,
> can be used to adjust how often keepalives are sent and how many
> can be lost before the connection is broken.

There isn't any need at at all for this. We can already add options on
the libpq connection line.

options = '-o tcp_keepalives_idle=X
tcp_keepalives_interval=Y
tcp_keepalives_count=Z'

I see zero need to further complicate the libpq interface. If it changes
frequently between releases then supporting PostgreSQL programs becomes
much harder and leads to software not working correctly with Postgres.
Connecting to Postgres is already too complex.

At most it needs an example in the manual to show how to do this the
existing way.

I'm sorry to express this opinion now, again because I misunderstood.

> The immediate motivation for this patch is to make sure that
> walreceiver will eventually notice if the master reboots without
> closing the connection cleanly, but it should be helpful in other
> cases as well.

My understanding is that the motivation for this is that the above
options parameter would not have worked? So I regard making that work as
a bug fix, so agree with some parts of this patch, I think.

-- 
 Simon Riggs           www.2ndQuadrant.com

  3. Re: [COMMITTERS] pgsql: Add TCP keepalive support to libpq.

    Tom Lane <tgl@sss.pgh.pa.us> — 2010-06-24T14:13:51Z

    Simon Riggs <simon@2ndQuadrant.com> writes:
> On Wed, 2010-06-23 at 21:54 +0000, Robert Haas wrote:
>> This adds four additional connection parameters to libpq: keepalives,
>> keepalives_idle, keepalives_count, and keepalives_interval.
>> keepalives default to on, per discussion, but can be turned off by
>> specifying keepalives=0.  The remaining parameters, where supported,
>> can be used to adjust how often keepalives are sent and how many
>> can be lost before the connection is broken.

> There isn't any need at at all for this. We can already add options on
> the libpq connection line.

> options = '-o tcp_keepalives_idle=X
> tcp_keepalives_interval=Y
> tcp_keepalives_count=Z'

Huh?  The above is 100% fanciful; there was no code in libpq or anywhere
else that would have processed such a thing.

The bigger picture is that this patch is needed, not only for
walreceiver but for many other purposes --- the feature has been
requested repeatedly over the years and was already in the 9.1
commitfest queue.  We moved it up because it seemed fairly important for
walreceiver's purposes, but it would have gotten done in the very near
future anyway.

			regards, tom lane

  4. Re: [COMMITTERS] pgsql: Add TCP keepalive support to libpq.

    Robert Haas <robertmhaas@gmail.com> — 2010-06-24T14:30:59Z

    On Thu, Jun 24, 2010 at 10:13 AM, Tom Lane <tgl@sss.pgh.pa.us> wrote:
> Simon Riggs <simon@2ndQuadrant.com> writes:
>> On Wed, 2010-06-23 at 21:54 +0000, Robert Haas wrote:
>>> This adds four additional connection parameters to libpq: keepalives,
>>> keepalives_idle, keepalives_count, and keepalives_interval.
>>> keepalives default to on, per discussion, but can be turned off by
>>> specifying keepalives=0.  The remaining parameters, where supported,
>>> can be used to adjust how often keepalives are sent and how many
>>> can be lost before the connection is broken.
>
>> There isn't any need at at all for this. We can already add options on
>> the libpq connection line.
>
>> options = '-o tcp_keepalives_idle=X
>> tcp_keepalives_interval=Y
>> tcp_keepalives_count=Z'
>
> Huh?  The above is 100% fanciful; there was no code in libpq or anywhere
> else that would have processed such a thing.

You can do this:

psql "host=127.0.0.1 options='-c tcp_keepalives_idle=1'"

...but it doesn't do the same thing as this patch.  It lets you set
the TCP keepalive parameters on the server side, whereas what this
patch does is let you set them on the client side.  Only setting them
on the client side will allow the client to notice when the server has
gone away.

There is still an open question in my mind as to whether this is
really an adequate solution to the walrecevier problem, but as you
say, if it turns out not to be, it's got other value.

-- 
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise Postgres Company

  5. Re: [COMMITTERS] pgsql: Add TCP keepalive support to libpq.

    Florian Pflug <fgp@phlo.org> — 2010-06-24T14:40:41Z

    On Jun 24, 2010, at 16:30 , Robert Haas wrote:
> On Thu, Jun 24, 2010 at 10:13 AM, Tom Lane <tgl@sss.pgh.pa.us> wrote:
>> Simon Riggs <simon@2ndQuadrant.com> writes:
>>> On Wed, 2010-06-23 at 21:54 +0000, Robert Haas wrote:
>>>> This adds four additional connection parameters to libpq: keepalives,
>>>> keepalives_idle, keepalives_count, and keepalives_interval.
>>>> keepalives default to on, per discussion, but can be turned off by
>>>> specifying keepalives=0.  The remaining parameters, where supported,
>>>> can be used to adjust how often keepalives are sent and how many
>>>> can be lost before the connection is broken.
>> 
>>> There isn't any need at at all for this. We can already add options on
>>> the libpq connection line.
>> 
>>> options = '-o tcp_keepalives_idle=X
>>> tcp_keepalives_interval=Y
>>> tcp_keepalives_count=Z'
>> 
>> Huh?  The above is 100% fanciful; there was no code in libpq or anywhere
>> else that would have processed such a thing.
> 
> You can do this:
> 
> psql "host=127.0.0.1 options='-c tcp_keepalives_idle=1'"

Hm, seems a bit error-prone though. The difference between the above

psql "host=127.0.0.1 keepalives=1"

isn't immediately obvious I'd say.

Should we maybe rename the libpq-side parameters to tcp_client_keepalives, tcp_client_keepalives_idle, tcp_client_keepalives_count and tcp_client_keepalives_interval? Or do we expect people who fiddle with those parameters to understand the subtle difference?

best regards,
Florian Pflug

  6. Re: [COMMITTERS] pgsql: Add TCP keepalive support to libpq.

    Robert Haas <robertmhaas@gmail.com> — 2010-06-24T14:45:45Z

    On Thu, Jun 24, 2010 at 10:40 AM, Florian Pflug <fgp@phlo.org> wrote:
> On Jun 24, 2010, at 16:30 , Robert Haas wrote:
>> On Thu, Jun 24, 2010 at 10:13 AM, Tom Lane <tgl@sss.pgh.pa.us> wrote:
>>> Simon Riggs <simon@2ndQuadrant.com> writes:
>>>> There isn't any need at at all for this. We can already add options on
>>>> the libpq connection line.
>>>
>>>> options = '-o tcp_keepalives_idle=X
>>>> tcp_keepalives_interval=Y
>>>> tcp_keepalives_count=Z'
>>>
>>> Huh?  The above is 100% fanciful; there was no code in libpq or anywhere
>>> else that would have processed such a thing.
>>
>> You can do this:
>>
>> psql "host=127.0.0.1 options='-c tcp_keepalives_idle=1'"
>
> Hm, seems a bit error-prone though. The difference between the above
>
> psql "host=127.0.0.1 keepalives=1"
>
> isn't immediately obvious I'd say.
>
> Should we maybe rename the libpq-side parameters to tcp_client_keepalives, tcp_client_keepalives_idle, tcp_client_keepalives_count and tcp_client_keepalives_interval? Or do we expect people who fiddle with those parameters to understand the subtle difference?

I think the existing names are fine - people should understand that
"options" means "server-side options" and that anything else is a
client-side option.  However, if there's a strong consensus the other
way and someone feels like working up a patch, that's fine too.

-- 
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise Postgres Company

  7. Re: [COMMITTERS] pgsql: Add TCP keepalive support to libpq.

    Florian Pflug <fgp@phlo.org> — 2010-06-24T15:08:58Z

    On Jun 24, 2010, at 16:45 , Robert Haas wrote:
> On Thu, Jun 24, 2010 at 10:40 AM, Florian Pflug <fgp@phlo.org> wrote:
>> On Jun 24, 2010, at 16:30 , Robert Haas wrote:
>>> On Thu, Jun 24, 2010 at 10:13 AM, Tom Lane <tgl@sss.pgh.pa.us> wrote:
>>>> Simon Riggs <simon@2ndQuadrant.com> writes:
>>>>> There isn't any need at at all for this. We can already add options on
>>>>> the libpq connection line.
>>>> 
>>>>> options = '-o tcp_keepalives_idle=X
>>>>> tcp_keepalives_interval=Y
>>>>> tcp_keepalives_count=Z'
>>>> 
>>>> Huh?  The above is 100% fanciful; there was no code in libpq or anywhere
>>>> else that would have processed such a thing.
>>> 
>>> You can do this:
>>> 
>>> psql "host=127.0.0.1 options='-c tcp_keepalives_idle=1'"
>> 
>> Hm, seems a bit error-prone though. The difference between the above
>> 
>> psql "host=127.0.0.1 keepalives=1"
>> 
>> isn't immediately obvious I'd say.
>> 
>> Should we maybe rename the libpq-side parameters to tcp_client_keepalives, tcp_client_keepalives_idle, tcp_client_keepalives_count and tcp_client_keepalives_interval? Or do we expect people who fiddle with those parameters to understand the subtle difference?
> 
> I think the existing names are fine - people should understand that
> "options" means "server-side options" and that anything else is a
> client-side option.  However, if there's a strong consensus the other
> way and someone feels like working up a patch, that's fine too.

I'd volunteer to create the patch if people think renaming the libpq options is a good idea.

best regards,
Florian Pflug

  8. Re: [COMMITTERS] pgsql: Add TCP keepalive support to libpq.

    Tom Lane <tgl@sss.pgh.pa.us> — 2010-06-24T15:15:23Z

    Florian Pflug <fgp@phlo.org> writes:
> On Jun 24, 2010, at 16:45 , Robert Haas wrote:
>> I think the existing names are fine - people should understand that
>> "options" means "server-side options" and that anything else is a
>> client-side option.  However, if there's a strong consensus the other
>> way and someone feels like working up a patch, that's fine too.

> I'd volunteer to create the patch if people think renaming the libpq options is a good idea.

I'm with Robert: the names are fine as-is.  We've not had complaints
about the libpq SSL parameters being confusingly like server-side SSL
parameters, for instance.

It might be a good idea to add a sentence to the documentation, though,
just pointing out that these control client-side keepalive probes rather
than server-side.

			regards, tom lane

  9. Re: [COMMITTERS] pgsql: Add TCP keepalive support to libpq.

    Simon Riggs <simon@2ndquadrant.com> — 2010-06-24T17:38:23Z

    On Thu, 2010-06-24 at 11:15 -0400, Tom Lane wrote:
> Florian Pflug <fgp@phlo.org> writes:
> > On Jun 24, 2010, at 16:45 , Robert Haas wrote:
> >> I think the existing names are fine - people should understand that
> >> "options" means "server-side options" and that anything else is a
> >> client-side option.  However, if there's a strong consensus the other
> >> way and someone feels like working up a patch, that's fine too.
> 
> > I'd volunteer to create the patch if people think renaming the libpq options is a good idea.
> 
> I'm with Robert: the names are fine as-is.  We've not had complaints
> about the libpq SSL parameters being confusingly like server-side SSL
> parameters, for instance.
> 
> It might be a good idea to add a sentence to the documentation, though,
> just pointing out that these control client-side keepalive probes rather
> than server-side.

Yes please. I was confused; I think others will be also.

-- 
 Simon Riggs           www.2ndQuadrant.com

  10. Re: [COMMITTERS] pgsql: Add TCP keepalive support to libpq.

    Simon Riggs <simon@2ndquadrant.com> — 2010-06-24T17:40:06Z

    On Thu, 2010-06-24 at 10:30 -0400, Robert Haas wrote:

> It lets you set
> the TCP keepalive parameters on the server side, whereas what this
> patch does is let you set them on the client side.  Only setting them
> on the client side will allow the client to notice when the server has
> gone away.

Thank you for explaining. Now I understand.

It sort of begs the question: why need they be different?

-- 
 Simon Riggs           www.2ndQuadrant.com

  11. Re: [COMMITTERS] pgsql: Add TCP keepalive support to libpq.

    Robert Haas <robertmhaas@gmail.com> — 2010-06-24T17:56:56Z

    On Thu, Jun 24, 2010 at 1:40 PM, Simon Riggs <simon@2ndquadrant.com> wrote:
> On Thu, 2010-06-24 at 10:30 -0400, Robert Haas wrote:
>
>> It lets you set
>> the TCP keepalive parameters on the server side, whereas what this
>> patch does is let you set them on the client side.  Only setting them
>> on the client side will allow the client to notice when the server has
>> gone away.
>
> Thank you for explaining. Now I understand.
>
> It sort of begs the question: why need they be different?

In most cases, they probably don't; in fact, I suspect most people
don't bother adjusting these parameters at all.  Essentially, they
just control the amount of time that can pass before you decide that
the other guy is dead.  And if the client thinks it's right to declare
the server dead after X minutes, it's probably reasonable for the
server to declare the client dead after X minutes, too.  On the other
hand, the client and server may be under different administrative
control.  What the DBA wants the database to do to avoid running out
of connection slots might not be the same as what the application
writer wants to do to detect when the database has crashed.  For that
exact reason, it's actually slightly strange that we make these
parameters PGC_USERSET on the server side - but not strange enough
that I can get excited about changing it.  If an application writer
wants to make trouble for the DBA, he certainly has better ways to do
it than this...

-- 
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise Postgres Company

  12. Re: [COMMITTERS] pgsql: Add TCP keepalive support to libpq.

    Robert Haas <robertmhaas@gmail.com> — 2010-06-24T19:49:04Z

    On Thu, Jun 24, 2010 at 1:38 PM, Simon Riggs <simon@2ndquadrant.com> wrote:
> On Thu, 2010-06-24 at 11:15 -0400, Tom Lane wrote:
>> Florian Pflug <fgp@phlo.org> writes:
>> > On Jun 24, 2010, at 16:45 , Robert Haas wrote:
>> >> I think the existing names are fine - people should understand that
>> >> "options" means "server-side options" and that anything else is a
>> >> client-side option.  However, if there's a strong consensus the other
>> >> way and someone feels like working up a patch, that's fine too.
>>
>> > I'd volunteer to create the patch if people think renaming the libpq options is a good idea.
>>
>> I'm with Robert: the names are fine as-is.  We've not had complaints
>> about the libpq SSL parameters being confusingly like server-side SSL
>> parameters, for instance.
>>
>> It might be a good idea to add a sentence to the documentation, though,
>> just pointing out that these control client-side keepalive probes rather
>> than server-side.
>
> Yes please. I was confused; I think others will be also.

Do either of you have any thoughts about where would be the best place
to add such a sentence?

-- 
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise Postgres Company

  13. Re: [COMMITTERS] pgsql: Add TCP keepalive support to libpq.

    Tom Lane <tgl@sss.pgh.pa.us> — 2010-06-25T03:50:28Z

    Robert Haas <robertmhaas@gmail.com> writes:
> On Thu, Jun 24, 2010 at 1:38 PM, Simon Riggs <simon@2ndquadrant.com> wrote:
>> On Thu, 2010-06-24 at 11:15 -0400, Tom Lane wrote:
>>> It might be a good idea to add a sentence to the documentation, though,
>>> just pointing out that these control client-side keepalive probes rather
>>> than server-side.
>> 
>> Yes please. I was confused; I think others will be also.

> Do either of you have any thoughts about where would be the best place
> to add such a sentence?

In the hunk you added to libpq.sgml would be fine by me.

			regards, tom lane

  14. Re: [COMMITTERS] pgsql: Add TCP keepalive support to libpq.

    Robert Haas <robertmhaas@gmail.com> — 2010-06-25T13:15:18Z

    On Thu, Jun 24, 2010 at 11:50 PM, Tom Lane <tgl@sss.pgh.pa.us> wrote:
> Robert Haas <robertmhaas@gmail.com> writes:
>> On Thu, Jun 24, 2010 at 1:38 PM, Simon Riggs <simon@2ndquadrant.com> wrote:
>>> On Thu, 2010-06-24 at 11:15 -0400, Tom Lane wrote:
>>>> It might be a good idea to add a sentence to the documentation, though,
>>>> just pointing out that these control client-side keepalive probes rather
>>>> than server-side.
>>>
>>> Yes please. I was confused; I think others will be also.
>
>> Do either of you have any thoughts about where would be the best place
>> to add such a sentence?
>
> In the hunk you added to libpq.sgml would be fine by me.

Well, the trick is that the hunk that I added is really four separate
sections, and adding a whole sentence to each one seems like overkill.
 Here's an attempt at rewording the sections so that the information
is included in each parameter's description without taking up a whole
sentence.

Thoughts?

-- 
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise Postgres Company

  15. Re: pgsql: Add TCP keepalive support to libpq.

    Kevin Grittner <kevin.grittner@wicourts.gov> — 2010-06-25T13:34:25Z

    Robert Haas <robertmhaas@gmail.com> wrote:
 
> Here's an attempt at rewording the sections so that the
> information is included in each parameter's description without
> taking up a whole sentence.
> 
> Thoughts?
 
It makes the point without beating one over the head with it.  I
particularly like the way this patch moves the main point of the
parameter to the front, with all the conditions under which it might
be ignored pushed farther back.  It reads much better that way, at
least for me.
 
-Kevin

  16. Re: pgsql: Add TCP keepalive support to libpq.

    Tom Lane <tgl@sss.pgh.pa.us> — 2010-06-25T17:02:51Z

    "Kevin Grittner" <Kevin.Grittner@wicourts.gov> writes:
> Robert Haas <robertmhaas@gmail.com> wrote:
>> Here's an attempt at rewording the sections so that the
>> information is included in each parameter's description without
>> taking up a whole sentence.
>> 
>> Thoughts?
 
> It makes the point without beating one over the head with it.  I
> particularly like the way this patch moves the main point of the
> parameter to the front, with all the conditions under which it might
> be ignored pushed farther back.  It reads much better that way, at
> least for me.

Looks good to me too.

			regards, tom lane

  17. Re: pgsql: Add TCP keepalive support to libpq.

    Robert Haas <robertmhaas@gmail.com> — 2010-06-25T17:08:31Z

    On Fri, Jun 25, 2010 at 1:02 PM, Tom Lane <tgl@sss.pgh.pa.us> wrote:
> "Kevin Grittner" <Kevin.Grittner@wicourts.gov> writes:
>> Robert Haas <robertmhaas@gmail.com> wrote:
>>> Here's an attempt at rewording the sections so that the
>>> information is included in each parameter's description without
>>> taking up a whole sentence.
>>>
>>> Thoughts?
>
>> It makes the point without beating one over the head with it.  I
>> particularly like the way this patch moves the main point of the
>> parameter to the front, with all the conditions under which it might
>> be ignored pushed farther back.  It reads much better that way, at
>> least for me.
>
> Looks good to me too.

OK, committed.

-- 
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise Postgres Company