Horton

Thread

Commits

  1. Add 'Portal Close' message to pipelined PQsendQuery()

  2. Shut down EvalPlanQual machinery when LockRows node reaches the end.

  3. Update libpq to make new features of FE/BE protocol available to

  4. Extended query protocol: parse, bind, execute, describe FE/BE messages.

  1. Add PortalDrop in exec_execute_message

    Yura Sokolov <y.sokolov@postgrespro.ru> — 2021-05-19T16:18:27Z

    Hi, hackers.

I've been playing with "autoprepared" patch, and have got isolation
"freeze-the-dead" test stuck on first VACUUM FREEZE statement.
After some research I found issue is reproduced with unmodified master
branch if extended protocol used. I've prepared ruby script for
demonstration (cause ruby-pg has simple interface to PQsendQueryParams).

Further investigation showed it happens due to portal is not dropped
inside of exec_execute_message, and it is kept in third session till
COMMIT is called. Therefore heap page remains pinned, and VACUUM FREEZE
became locked inside LockBufferForCleanup.

It seems that it is usually invisible to common users since either:
- command is called as standalone and then transaction is closed
   immediately,
- next PQsendQueryParams will initiate another unnamed portal using
   CreatePortal("", true, true) and this action will drop previous
   one.

But "freeze-the-dead" remains locked since third session could not
send COMMIT until VACUUM FULL finished.

I propose to add PortalDrop at the 'if (completed)' branch of
exec_execute_message.

--- a/src/backend/tcop/postgres.c
+++ b/src/backend/tcop/postgres.c
@@ -2209,6 +2209,8 @@ exec_execute_message(const char *portal_name, long 
max_rows)

         if (completed)
         {
+               PortalDrop(portal, false);
+
                 if (is_xact_command)
                 {

With this change 'make check-world' runs without flaws (at least
on empty configure with enable-cassert and enable-tap-tests).

There is small chance applications exist which abuses seekable
portals with 'execute' protocol message so not every completed
portal can be safely dropped. But I believe there is some sane
conditions that cover common case. For example, isn't empty name
check is enough? Can client reset or seek portal with empty
name?

regards,
Sokolov Yura aka funny_falcon

  2. Re: Add PortalDrop in exec_execute_message

    Tom Lane <tgl@sss.pgh.pa.us> — 2021-05-21T18:23:20Z

    Yura Sokolov <y.sokolov@postgrespro.ru> writes:
> I propose to add PortalDrop at the 'if (completed)' branch of
> exec_execute_message.

This violates our wire protocol specification, which
specifically says

    If successfully created, a named portal object lasts till the end of
    the current transaction, unless explicitly destroyed. An unnamed
    portal is destroyed at the end of the transaction, or as soon as the
    next Bind statement specifying the unnamed portal as destination is
    issued. (Note that a simple Query message also destroys the unnamed
    portal.)

I'm inclined to think that your complaint would be better handled
by having the client send a portal-close command, if it's not
going to do something else immediately.

			regards, tom lane

  3. Re: Add PortalDrop in exec_execute_message

    Yura Sokolov <y.sokolov@postgrespro.ru> — 2021-05-25T00:58:43Z

    Tom Lane писал 2021-05-21 21:23:
> Yura Sokolov <y.sokolov@postgrespro.ru> writes:
>> I propose to add PortalDrop at the 'if (completed)' branch of
>> exec_execute_message.
> 
> This violates our wire protocol specification, which
> specifically says
> 
>     If successfully created, a named portal object lasts till the end 
> of
>     the current transaction, unless explicitly destroyed. An unnamed
>     portal is destroyed at the end of the transaction, or as soon as 
> the
>     next Bind statement specifying the unnamed portal as destination is
>     issued. (Note that a simple Query message also destroys the unnamed
>     portal.)
> 
> I'm inclined to think that your complaint would be better handled
> by having the client send a portal-close command, if it's not
> going to do something else immediately.

I thought about it as well. Then, if I understand correctly,
PQsendQueryGuts and PQsendQueryInternal in pipeline mode should send
"close portal" (CP) message after "execute" message, right?

regards,
Sokolov Yura

  4. Re: Add PortalDrop in exec_execute_message

    Alvaro Herrera <alvherre@alvh.no-ip.org> — 2021-05-26T20:59:17Z

    On 2021-May-25, Yura Sokolov wrote:

> Tom Lane писал 2021-05-21 21:23:
> > Yura Sokolov <y.sokolov@postgrespro.ru> writes:
> > > I propose to add PortalDrop at the 'if (completed)' branch of
> > > exec_execute_message.
> > 
> > This violates our wire protocol specification, which
> > specifically says
> > 
> >     If successfully created, a named portal object lasts till the end of
> >     the current transaction, unless explicitly destroyed. An unnamed
> >     portal is destroyed at the end of the transaction, or as soon as the
> >     next Bind statement specifying the unnamed portal as destination is
> >     issued. (Note that a simple Query message also destroys the unnamed
> >     portal.)
> > 
> > I'm inclined to think that your complaint would be better handled
> > by having the client send a portal-close command, if it's not
> > going to do something else immediately.
> 
> I thought about it as well. Then, if I understand correctly,
> PQsendQueryGuts and PQsendQueryInternal in pipeline mode should send
> "close portal" (CP) message after "execute" message, right?

I don't think they should do that.  The portal remains open, and the
libpq interface does that.  The portal gets closed at end of transaction
without the need for any client message.  I think if the client wanted
to close the portal ahead of time, it would need a new libpq entry point
to send the message to do that.

(I didn't add a Close Portal message to PQsendQueryInternal in pipeline
mode precisely because there is no such message in PQsendQueryGuts.
I think it would be wrong to unconditionally add a Close Portal message
to any of those places.)

-- 
Álvaro Herrera                            39°49'30"S 73°17'W

  5. Re: Add PortalDrop in exec_execute_message

    Tom Lane <tgl@sss.pgh.pa.us> — 2021-05-26T21:19:52Z

    Alvaro Herrera <alvherre@alvh.no-ip.org> writes:
> (I didn't add a Close Portal message to PQsendQueryInternal in pipeline
> mode precisely because there is no such message in PQsendQueryGuts.
> I think it would be wrong to unconditionally add a Close Portal message
> to any of those places.)

Yeah, I'm not very comfortable with having libpq take it on itself
to do that, either.

Looking back at the original complaint, it seems like it'd be fair to
wonder why we're still holding a page pin in a supposedly completed
executor run.  Maybe the right fix is somewhere in the executor
scan logic.

			regards, tom lane

  6. Re: Add PortalDrop in exec_execute_message

    Yura Sokolov <y.sokolov@postgrespro.ru> — 2021-05-27T11:45:50Z

    Alvaro Herrera писал 2021-05-26 23:59:
> On 2021-May-25, Yura Sokolov wrote:
> 
>> Tom Lane писал 2021-05-21 21:23:
>> > Yura Sokolov <y.sokolov@postgrespro.ru> writes:
>> > > I propose to add PortalDrop at the 'if (completed)' branch of
>> > > exec_execute_message.
>> >
>> > This violates our wire protocol specification, which
>> > specifically says
>> >
>> >     If successfully created, a named portal object lasts till the end of
>> >     the current transaction, unless explicitly destroyed. An unnamed
>> >     portal is destroyed at the end of the transaction, or as soon as the
>> >     next Bind statement specifying the unnamed portal as destination is
>> >     issued. (Note that a simple Query message also destroys the unnamed
>> >     portal.)
>> >
>> > I'm inclined to think that your complaint would be better handled
>> > by having the client send a portal-close command, if it's not
>> > going to do something else immediately.
>> 
>> I thought about it as well. Then, if I understand correctly,
>> PQsendQueryGuts and PQsendQueryInternal in pipeline mode should send
>> "close portal" (CP) message after "execute" message, right?
> 
> I don't think they should do that.  The portal remains open, and the
> libpq interface does that.  The portal gets closed at end of 
> transaction
> without the need for any client message.  I think if the client wanted
> to close the portal ahead of time, it would need a new libpq entry 
> point
> to send the message to do that.

- PQsendQuery issues Query message, and exec_simple_query closes its
   portal.
- people doesn't expect PQsendQueryParams to be different from
   PQsendQuery aside of parameter sending. The fact that the portal
   remains open is a significant, unexpected and undesired difference.
- PQsendQueryGuts is used in PQsendQueryParams and PQsendQueryPrepared.
   It is always sends empty portal name and always "send me all rows"
   limit (zero). Both usages are certainly to just perform query and
   certainly no one expects portal remains open.

> (I didn't add a Close Portal message to PQsendQueryInternal in pipeline
> mode precisely because there is no such message in PQsendQueryGuts.

But PQsendQueryInternal should replicate behavior of PQsendQuery and
not PQsendQueryParams. Despite it has to use new protocol, it should
be indistinguishable to user, therefore portal should be closed.

> I think it would be wrong to unconditionally add a Close Portal message
> to any of those places.)

Why? If you foresee problems, please share your mind.

regards,
Sokolov Yura aka funny_falcon

  7. Re: Add PortalDrop in exec_execute_message

    Yura Sokolov <y.sokolov@postgrespro.ru> — 2021-05-27T11:54:11Z

    Tom Lane wrote 2021-05-27 00:19:
> Alvaro Herrera <alvherre@alvh.no-ip.org> writes:
>> (I didn't add a Close Portal message to PQsendQueryInternal in 
>> pipeline
>> mode precisely because there is no such message in PQsendQueryGuts.
>> I think it would be wrong to unconditionally add a Close Portal 
>> message
>> to any of those places.)
> 
> Yeah, I'm not very comfortable with having libpq take it on itself
> to do that, either.

But...

Tom Lane wrote 2021-05-21 21:23:
> I'm inclined to think that your complaint would be better handled
> by having the client send a portal-close command, if it's not
> going to do something else immediately.

And given PQsendQueryParams should not be different from
PQsendQuery (aside of parameters sending) why shouldn't it close
its portal immediately, like it happens in exec_simple_query ?

I really doubt user of PQsendQueryPrepared is aware of portal as
well since it is also unnamed and also exhausted (because
PQsendQueryGuts always sends "send me all rows" limit).

And why PQsendQueryInternal should behave differently in pipelined
and not pipelined mode? It closes portal in not pipelined mode,
and will not close portal of last query in pipelined mode (inside
of transaction).

> Looking back at the original complaint, it seems like it'd be fair to
> wonder why we're still holding a page pin in a supposedly completed
> executor run.  Maybe the right fix is somewhere in the executor
> scan logic.

Perhaps because query is simple and portal is created as seek-able?

> 
> 			regards, tom lane

regards
Yura Sokolov

  8. Re: Add PortalDrop in exec_execute_message

    Alvaro Herrera <alvherre@alvh.no-ip.org> — 2021-06-07T21:07:34Z

    On 2021-May-27, Yura Sokolov wrote:

> Alvaro Herrera писал 2021-05-26 23:59:

> > I don't think they should do that.  The portal remains open, and the
> > libpq interface does that.  The portal gets closed at end of transaction
> > without the need for any client message.  I think if the client wanted
> > to close the portal ahead of time, it would need a new libpq entry point
> > to send the message to do that.
> 
> - PQsendQuery issues Query message, and exec_simple_query closes its
>   portal.
> - people doesn't expect PQsendQueryParams to be different from
>   PQsendQuery aside of parameter sending. The fact that the portal
>   remains open is a significant, unexpected and undesired difference.
> - PQsendQueryGuts is used in PQsendQueryParams and PQsendQueryPrepared.
>   It is always sends empty portal name and always "send me all rows"
>   limit (zero). Both usages are certainly to just perform query and
>   certainly no one expects portal remains open.

Thinking about it some more, Yura's argument about PQsendQuery does make
sense -- since what we're doing is replacing the use of a 'Q' message
just because we can't use it when in pipeline mode, then it is
reasonable to think that the replacement ought to have the same
behavior.  Upon receipt of a 'Q' message, the portal is closed
automatically, and ISTM that that behavior should be preserved.

That change would not solve the problem he complains about, because IIUC
his framework is using PQsendQueryPrepared, which I'm not proposing to
change.  It just removes the other discrepancy that was discussed in the
thread.

The attached patch does it.  Any opinions?

-- 
Álvaro Herrera       Valdivia, Chile
"[PostgreSQL] is a great group; in my opinion it is THE best open source
development communities in existence anywhere."                (Lamar Owen)

  9. Re: Add PortalDrop in exec_execute_message

    Tom Lane <tgl@sss.pgh.pa.us> — 2021-06-07T21:59:57Z

    Alvaro Herrera <alvherre@alvh.no-ip.org> writes:
> The attached patch does it.  Any opinions?

My opinion is there's no patch here.

			regards, tom lane

  10. Re: Add PortalDrop in exec_execute_message

    Alvaro Herrera <alvherre@alvh.no-ip.org> — 2021-06-07T22:08:33Z

    On 2021-Jun-07, Alvaro Herrera wrote:

> The attached patch does it.  Any opinions?

Eh, really attached.

-- 
Álvaro Herrera                            39°49'30"S 73°17'W
"No es bueno caminar con un hombre muerto"

  11. Re: Add PortalDrop in exec_execute_message

    Tom Lane <tgl@sss.pgh.pa.us> — 2021-06-07T22:15:49Z

    Alvaro Herrera <alvherre@alvh.no-ip.org> writes:
> On 2021-Jun-07, Alvaro Herrera wrote:
>> The attached patch does it.  Any opinions?

> Eh, really attached.

No particular objection.  I'm not sure this will behave quite the
same as simple-Query in error cases, but probably it's close enough.

I'm still wondering though why Yura is observing resources remaining
held by an executed-to-completion Portal.  I think investigating that
might be more useful than tinkering with pipeline mode.

			regards, tom lane

  12. Re: Add PortalDrop in exec_execute_message

    Tom Lane <tgl@sss.pgh.pa.us> — 2021-06-09T17:25:59Z

    I wrote:
> I'm still wondering though why Yura is observing resources remaining
> held by an executed-to-completion Portal.  I think investigating that
> might be more useful than tinkering with pipeline mode.

I got a chance to look into this finally.  The lens I've been looking
at this through is "why are we still holding any buffer pins when
ExecutorRun finishes?".  Normal table scan nodes won't do that.

It turns out that the problem is specific to SELECT FOR UPDATE, and
it happens because nodeLockRows is not careful to shut down the
EvalPlanQual mechanism it uses before returning NULL at the end of
a scan.  If EPQ has been fired, it'll be holding a tuple slot
referencing whatever tuple it was last asked about.  The attached
trivial patch seems to take care of the issue nicely, while adding
little if any overhead.  (A repeat call to EvalPlanQualEnd doesn't
do much.)

			regards, tom lane

  13. Re: Add PortalDrop in exec_execute_message

    Tom Lane <tgl@sss.pgh.pa.us> — 2021-06-09T19:07:48Z

    I wrote:
> It turns out that the problem is specific to SELECT FOR UPDATE, and
> it happens because nodeLockRows is not careful to shut down the
> EvalPlanQual mechanism it uses before returning NULL at the end of
> a scan.  If EPQ has been fired, it'll be holding a tuple slot
> referencing whatever tuple it was last asked about.  The attached
> trivial patch seems to take care of the issue nicely, while adding
> little if any overhead.  (A repeat call to EvalPlanQualEnd doesn't
> do much.)

BTW, to be clear: I think Alvaro's change is also necessary.
If libpq is going to silently do something different in pipeline
mode than it does in normal mode, it should strive to minimize
the semantic difference.  exec_simple_query includes a PortalDrop,
so we'd best do the same in pipeline mode.  But this LockRows
misbehavior would be visible in other operating modes anyway.

			regards, tom lane

  14. Re: Add PortalDrop in exec_execute_message

    Alvaro Herrera <alvherre@alvh.no-ip.org> — 2021-06-09T19:34:53Z

    On 2021-Jun-09, Tom Lane wrote:

> I wrote:
> > It turns out that the problem is specific to SELECT FOR UPDATE, and
> > it happens because nodeLockRows is not careful to shut down the
> > EvalPlanQual mechanism it uses before returning NULL at the end of
> > a scan.  If EPQ has been fired, it'll be holding a tuple slot
> > referencing whatever tuple it was last asked about.  The attached
> > trivial patch seems to take care of the issue nicely, while adding
> > little if any overhead.  (A repeat call to EvalPlanQualEnd doesn't
> > do much.)

Thanks for researching that -- good find.

> BTW, to be clear: I think Alvaro's change is also necessary.
> If libpq is going to silently do something different in pipeline
> mode than it does in normal mode, it should strive to minimize
> the semantic difference.  exec_simple_query includes a PortalDrop,
> so we'd best do the same in pipeline mode.  But this LockRows
> misbehavior would be visible in other operating modes anyway.

Agreed.  I'll get it pushed after the patch I'm currently looking at.

-- 
Álvaro Herrera                            39°49'30"S 73°17'W

  15. Re: Add PortalDrop in exec_execute_message

    Yura Sokolov <y.sokolov@postgrespro.ru> — 2021-06-11T05:21:01Z

    Alvaro Herrera wrote 2021-06-08 00:07:
> On 2021-May-27, Yura Sokolov wrote:
> 
>> Alvaro Herrera писал 2021-05-26 23:59:
> 
>> > I don't think they should do that.  The portal remains open, and the
>> > libpq interface does that.  The portal gets closed at end of transaction
>> > without the need for any client message.  I think if the client wanted
>> > to close the portal ahead of time, it would need a new libpq entry point
>> > to send the message to do that.
>> 
>> - PQsendQuery issues Query message, and exec_simple_query closes its
>>   portal.
>> - people doesn't expect PQsendQueryParams to be different from
>>   PQsendQuery aside of parameter sending. The fact that the portal
>>   remains open is a significant, unexpected and undesired difference.
>> - PQsendQueryGuts is used in PQsendQueryParams and 
>> PQsendQueryPrepared.
>>   It is always sends empty portal name and always "send me all rows"
>>   limit (zero). Both usages are certainly to just perform query and
>>   certainly no one expects portal remains open.
> 
> Thinking about it some more, Yura's argument about PQsendQuery does 
> make
> sense -- since what we're doing is replacing the use of a 'Q' message
> just because we can't use it when in pipeline mode, then it is
> reasonable to think that the replacement ought to have the same
> behavior.  Upon receipt of a 'Q' message, the portal is closed
> automatically, and ISTM that that behavior should be preserved.
> 
> That change would not solve the problem he complains about, because 
> IIUC
> his framework is using PQsendQueryPrepared, which I'm not proposing to
> change.  It just removes the other discrepancy that was discussed in 
> the
> thread.
> 
> The attached patch does it.  Any opinions?

I'm propose to change PQsendQueryParams and PQsendQueryPrepared
(through change of PQsendQueryGuts) since they both has semantic
"execute unnamed portal till the end and send me all rows".

Extended protocol were introduced by Tom Lane on 2003-05-05
in 16503e6fa4a13051debe09698b6db9ce0d509af8
This commit already has Close ('C') message.
https://git.postgresql.org/gitweb/?p=postgresql.git;a=commit;h=16503e6fa4a13051debe09698b6db9ce0d509af8

libpq adoption of extended protocol were made by Tom month later
on 2003-06-23 in efc3a25bb02ada63158fe7006673518b005261ba
and there is already no Close message in PQsendQueryParams.
https://git.postgresql.org/gitweb/?p=postgresql.git;a=commit;h=efc3a25bb02ada63158fe7006673518b005261ba

I didn't found any relevant discussion in pgsql-hackers on May
and June 2003.

This makes me think, Close message were intended to be used
but simply forgotten when libpq patch were made.

Tom, could I be right?

regards,
Yura.

  16. Re: Add PortalDrop in exec_execute_message

    Tom Lane <tgl@sss.pgh.pa.us> — 2021-06-11T13:38:25Z

    Yura Sokolov <y.sokolov@postgrespro.ru> writes:
> This makes me think, Close message were intended to be used
> but simply forgotten when libpq patch were made.
> Tom, could I be right?

You could argue all day about what the intentions were nearly twenty
years ago.  But the facts on the ground are that we don't issue Close
in those places, and changing it now would be a de facto protocol
change for applications.  So I'm a hard -1 on these proposals.

(Alvaro's proposed change isn't a protocol break, since pipeline
mode hasn't shipped yet.  It's trying to make some brand new code
act more like old code, which seems like a fine idea.)

I think that the actual problem here has been resolved in
commit bb4aed46a.  Perhaps we should reconsider my decision not to
back-patch that.  Unlike a protocol change, that one could possibly
be sane to back-patch.  I didn't think it was worth the trouble and
risk, but maybe there's a case for it.

			regards, tom lane

  17. Re: Add PortalDrop in exec_execute_message

    Alvaro Herrera <alvherre@alvh.no-ip.org> — 2021-06-11T20:21:29Z

    On 2021-Jun-09, Tom Lane wrote:

> BTW, to be clear: I think Alvaro's change is also necessary.
> If libpq is going to silently do something different in pipeline
> mode than it does in normal mode, it should strive to minimize
> the semantic difference.  exec_simple_query includes a PortalDrop,
> so we'd best do the same in pipeline mode.

Pushed that patch, thanks.

-- 
Álvaro Herrera       Valdivia, Chile
"At least to kernel hackers, who really are human, despite occasional
rumors to the contrary" (LWN.net)