Horton

Thread

Commits

  1. Fix out-of-bound memory access for interval -> char conversion

  1. BUG #16953: OOB access while converting "interval" to char

    The Post Office <noreply@postgresql.org> — 2021-04-07T09:09:25Z

    The following bug has been logged on the website:

Bug reference:      16953
Logged by:          Theodor Arsenij Larionov-Trichkin
Email address:      t.larionov@postgrespro.ru
PostgreSQL version: 13.2
Operating system:   Ubuntu 20.04.2 LTS
Description:        

Hello!
How to reproduce:
1. mkdir -p ./installation/databases
2. git clone --single-branch --depth=1 --branch=REL_13_2
https://github.com/postgres/postgres postgres_src
3. cd postgres_src
4. ./configure --prefix=`pwd`/../installation/pgbuild
5. make -j20 && make install && cd ..
6. ./installation/pgbuild/bin/initdb -U username -D
./installation/databases/db_clean
7. ./installation/pgbuild/bin/postgres -D
./installation/databases/db_clean/
8. ./installation/pgbuild/bin/psql -h 127.0.0.1 -p 5432 -U username
postgres
9. Performing this query will result in OOB access of rm_months_lower array
and as a result crash: SELECT * from TO_CHAR(interval '-1Mon', 'rm');

Output:
2021-04-07 12:07:27.060 MSK [33887] LOG:  starting PostgreSQL 13.2 on
x86_64-pc-linux-gnu, compiled by gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0,
64-bit
2021-04-07 12:07:27.060 MSK [33887] LOG:  listening on IPv4 address
"127.0.0.1", port 5432
2021-04-07 12:07:27.065 MSK [33887] LOG:  listening on Unix socket
"/tmp/.s.PGSQL.5432"
2021-04-07 12:07:27.069 MSK [33888] LOG:  database system was shut down at
2021-04-07 12:07:22 MSK
2021-04-07 12:07:27.071 MSK [33887] LOG:  database system is ready to accept
connections
2021-04-07 12:08:01.013 MSK [33887] LOG:  server process (PID 34113) was
terminated by signal 11: Segmentation fault
2021-04-07 12:08:01.013 MSK [33887] DETAIL:  Failed process was running:
SELECT * from TO_CHAR(interval '-1Mon', 'rm');
2021-04-07 12:08:01.013 MSK [33887] LOG:  terminating any other active
server processes
2021-04-07 12:08:01.013 MSK [33892] WARNING:  terminating connection because
of crash of another server process
2021-04-07 12:08:01.013 MSK [33892] DETAIL:  The postmaster has commanded
this server process to roll back the current transaction and exit, because
another server process exited abnormally and possibly corrupted shared
memory.
2021-04-07 12:08:01.013 MSK [33892] HINT:  In a moment you should be able to
reconnect to the database and repeat your command.
2021-04-07 12:08:01.013 MSK [35036] FATAL:  the database system is in
recovery mode
2021-04-07 12:08:01.014 MSK [33887] LOG:  all server processes terminated;
reinitializing
2021-04-07 12:08:01.027 MSK [35038] LOG:  database system was interrupted;
last known up at 2021-04-07 12:07:27 MSK
2021-04-07 12:08:01.248 MSK [35038] LOG:  database system was not properly
shut down; automatic recovery in progress
2021-04-07 12:08:01.249 MSK [35038] LOG:  redo starts at 0/1559798
2021-04-07 12:08:01.249 MSK [35038] LOG:  invalid record length at
0/15597D0: wanted 24, got 0
2021-04-07 12:08:01.249 MSK [35038] LOG:  redo done at 0/1559798
2021-04-07 12:08:01.256 MSK [33887] LOG:  database system is ready to accept
connections

Postgres version:
PostgreSQL 13.2 on x86_64-pc-linux-gnu, compiled by gcc (Ubuntu
9.3.0-17ubuntu1~20.04) 9.3.0, 64-bit

  2. Re: BUG #16953: OOB access while converting "interval" to char

    Julien Rouhaud <rjuju123@gmail.com> — 2021-04-07T12:08:56Z

    Hi,

On Wed, Apr 07, 2021 at 09:09:25AM +0000, PG Bug reporting form wrote:
> The following bug has been logged on the website:
> 
> Bug reference:      16953
> Logged by:          Theodor Arsenij Larionov-Trichkin
> Email address:      t.larionov@postgrespro.ru
> PostgreSQL version: 13.2
> Operating system:   Ubuntu 20.04.2 LTS
> Description:        
> 
> 9. Performing this query will result in OOB access of rm_months_lower array
> and as a result crash: SELECT * from TO_CHAR(interval '-1Mon', 'rm');
> 
> Output:
> [...]
> terminated by signal 11: Segmentation fault
> 2021-04-07 12:08:01.013 MSK [33887] DETAIL:  Failed process was running:
> SELECT * from TO_CHAR(interval '-1Mon', 'rm');

Indeed, thanks a lot for the report!

It's because rm/RM are computed in a way that doesn't play nice with negative
values:

				sprintf(s, "%*s", S_FM(n->suffix) ? 0 : -4,
						rm_months_lower[MONTHS_PER_YEAR - tm->tm_mon]);

PFA a naive patch to fix this problem with some regression tests.  I'm assuming
that -1 month should be january and not december.  I had a quick look at the
rest of formatting.c and didn't spot any similar problem, but another pair of
eyes wouldn't hurt.

  3. Re: BUG #16953: OOB access while converting "interval" to char

    Michael Paquier <michael@paquier.xyz> — 2021-04-08T10:17:50Z

    On Wed, Apr 07, 2021 at 08:08:56PM +0800, Julien Rouhaud wrote:
> PFA a naive patch to fix this problem with some regression tests.  I'm assuming
> that -1 month should be january and not december.  I had a quick look at the
> rest of formatting.c and didn't spot any similar problem, but another pair of
> eyes wouldn't hurt.

Assuming an absolute number is not really intuitive when it comes to a
negative number here, while counting backward feels more natural, so I
would vote for making -1 be December, -2 November, etc.

Let's also make the tests more extended.  I would suggest a single
query with generate_series() from say -12 to 12, that checks the
output of both RM and rm for the full range of values supported by
tm_mon.
--
Michael

  4. Re: BUG #16953: OOB access while converting "interval" to char

    Julien Rouhaud <rjuju123@gmail.com> — 2021-04-08T11:04:03Z

    On Thu, Apr 08, 2021 at 07:17:50PM +0900, Michael Paquier wrote:
> On Wed, Apr 07, 2021 at 08:08:56PM +0800, Julien Rouhaud wrote:
> > PFA a naive patch to fix this problem with some regression tests.  I'm assuming
> > that -1 month should be january and not december.  I had a quick look at the
> > rest of formatting.c and didn't spot any similar problem, but another pair of
> > eyes wouldn't hurt.
> 
> Assuming an absolute number is not really intuitive when it comes to a
> negative number here, while counting backward feels more natural, so I
> would vote for making -1 be December, -2 November, etc.

Honestly I might as well have flipped a coin here, so I'm fine either way.

> Let's also make the tests more extended.  I would suggest a single
> query with generate_series() from say -12 to 12, that checks the
> output of both RM and rm for the full range of values supported by
> tm_mon.

I'm fine with it too, although I'd probably go with [-13, 13] just to make sure
that there's isn't silly off-by-one mistake.

I'll just wait a bit to see if anyone else has any opinion on whether -1 month
should be January or December.

  5. Re: BUG #16953: OOB access while converting "interval" to char

    Michael Paquier <michael@paquier.xyz> — 2021-04-08T11:37:21Z

    On Thu, Apr 08, 2021 at 07:04:03PM +0800, Julien Rouhaud wrote:
> I'm fine with it too, although I'd probably go with [-13, 13] just to make sure
> that there's isn't silly off-by-one mistake.

Also, I guess that you'd just want to compile twice a modulo based on
MONTHS_PER_YEAR to get the correct positive position in each array.

> I'll just wait a bit to see if anyone else has any opinion on whether -1 month
> should be January or December.

Sure.  If you can send an updated patch, that would be great.
--
Michael

  6. Re: BUG #16953: OOB access while converting "interval" to char

    Julien Rouhaud <rjuju123@gmail.com> — 2021-04-09T10:42:46Z

    On Thu, Apr 08, 2021 at 08:37:21PM +0900, Michael Paquier wrote:
> On Thu, Apr 08, 2021 at 07:04:03PM +0800, Julien Rouhaud wrote:
> > I'm fine with it too, although I'd probably go with [-13, 13] just to make sure
> > that there's isn't silly off-by-one mistake.
> 
> Also, I guess that you'd just want to compile twice a modulo based on
> MONTHS_PER_YEAR to get the correct positive position in each array.

I'm not sure what you mean by that.  We receive a pg_tm struct which can't
contain more than 12 in tm_mon right?  And actually for intervals it will
reduce "12 months" to "1 year 0 month", so to_char previously didn't report
anything for 12 months either.
> 
> > I'll just wait a bit to see if anyone else has any opinion on whether -1 month
> > should be January or December.
> 
> Sure.  If you can send an updated patch, that would be great.

Hearing no other opinion I went with -1 -> december and so on in attached v2.
I also fixed the "[-]12 months" case and updated the regression tests.  Given
the extra code needed to deduce the correct array position I factorized DCH_RM
and DCH_rm.

  7. Re: BUG #16953: OOB access while converting "interval" to char

    Michael Paquier <michael@paquier.xyz> — 2021-04-09T10:58:51Z

    On Fri, Apr 09, 2021 at 06:42:46PM +0800, Julien Rouhaud wrote:
> I'm not sure what you mean by that.  We receive a pg_tm struct which can't
> contain more than 12 in tm_mon right?  And actually for intervals it will
> reduce "12 months" to "1 year 0 month", so to_char previously didn't report
> anything for 12 months either.

I did not take the time to look in details, but for reference I just
imagined that a formula like this one would give pretty much the
position in rm_months_upper:
M_PER_Y - ((tm_mon % M_PER_Y) + M_PER_Y) % M_PER_Y

> Hearing no other opinion I went with -1 -> december and so on in attached v2.
> I also fixed the "[-]12 months" case and updated the regression tests.  Given
> the extra code needed to deduce the correct array position I factorized DCH_RM
> and DCH_rm.

Yep.  The regression tests show what I would expect.  I'll check in
details later.
--
Michael

  8. Re: BUG #16953: OOB access while converting "interval" to char

    Michael Paquier <michael@paquier.xyz> — 2021-04-12T03:04:23Z

    On Fri, Apr 09, 2021 at 07:58:51PM +0900, Michael Paquier wrote:
> Yep.  The regression tests show what I would expect.  I'll check in
> details later.

I have spent some time on that today and applied this patch down to
9.6, after adding more comments and simplifying a bit the calculation
method used.  Instead of using the "mon" variable to store an
intermediate result, I have simplified things so as this only uses
tm->tm_mon, and "mon" for the position in the roman-numeral array is
adjusted only once.
--
Michael

  9. Re: BUG #16953: OOB access while converting "interval" to char

    Julien Rouhaud <rjuju123@gmail.com> — 2021-04-12T03:13:02Z

    On Mon, Apr 12, 2021 at 12:04:23PM +0900, Michael Paquier wrote:
> On Fri, Apr 09, 2021 at 07:58:51PM +0900, Michael Paquier wrote:
> > Yep.  The regression tests show what I would expect.  I'll check in
> > details later.
> 
> I have spent some time on that today and applied this patch down to
> 9.6, after adding more comments and simplifying a bit the calculation
> method used.  Instead of using the "mon" variable to store an
> intermediate result, I have simplified things so as this only uses
> tm->tm_mon, and "mon" for the position in the roman-numeral array is
> adjusted only once.

Thanks Michael!  I thought we'd want to keep the original calculation for
consistency, but directly computing the needed offset is clearly simpler to
read!