Horton

Thread

  1. perl 5.6.0 almost working!

    John M. Flinchbaugh <glynis@butterfly.hjsoft.com> — 2000-04-05T20:50:00Z

    -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

it seems in src/interfaces/Makefile, the perl5/Makefile rule gets the
POLLUTE=1 option as necessary, which makes it work for make all, but
doing a ``make install'' uses the perl5-install, which does not build the
perl5/Makefile with POLLUTE=1. 

____________________}John Flinchbaugh{______________________
| glynis@hjsoft.com         http://www.hjsoft.com/~glynis/ |
~~Powered by Linux: Reboots are for hardware upgrades only~~
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.0 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iEYEARECAAYFAjjrpv0ACgkQCGPRljI8081+3wCeOf6w9e9nwwJr3TFWchbWasoy
T68An208BF3dn/apwNrjzguwh+LBsD/4
=lqRo
-----END PGP SIGNATURE-----

  2. Re: perl 5.6.0 almost working!

    Bruce Momjian <pgman@candle.pha.pa.us> — 2000-04-05T23:14:50Z

    -- Start of PGP signed section.
> it seems in src/interfaces/Makefile, the perl5/Makefile rule gets the
> POLLUTE=1 option as necessary, which makes it work for make all, but
> doing a ``make install'' uses the perl5-install, which does not build the
> perl5/Makefile with POLLUTE=1. 

Well, that is interesting.  I am quite confused how Makefile can get
generated without the parameter.  Can you suggest a patch?

-- 
  Bruce Momjian                        |  http://www.op.net/~candle
  pgman@candle.pha.pa.us               |  (610) 853-3000
  +  If your life is a hard drive,     |  830 Blythe Avenue
  +  Christ can be your backup.        |  Drexel Hill, Pennsylvania 19026

  3. Re: perl 5.6.0 almost working!

    Tom Lane <tgl@sss.pgh.pa.us> — 2000-04-06T03:12:36Z

    Bruce Momjian <pgman@candle.pha.pa.us> writes:
>> it seems in src/interfaces/Makefile, the perl5/Makefile rule gets the
>> POLLUTE=1 option as necessary, which makes it work for make all, but
>> doing a ``make install'' uses the perl5-install, which does not build the
>> perl5/Makefile with POLLUTE=1. 

Oops...

> Well, that is interesting.  I am quite confused how Makefile can get
> generated without the parameter.  Can you suggest a patch?

I believe he meant that line 54 needs to have POLLUTE=1 too ...

			regards, tom lane

  4. Re: perl 5.6.0 almost working!

    Bruce Momjian <pgman@candle.pha.pa.us> — 2000-04-06T03:34:12Z

    > Bruce Momjian <pgman@candle.pha.pa.us> writes:
> >> it seems in src/interfaces/Makefile, the perl5/Makefile rule gets the
> >> POLLUTE=1 option as necessary, which makes it work for make all, but
> >> doing a ``make install'' uses the perl5-install, which does not build the
> >> perl5/Makefile with POLLUTE=1. 
> 
> Oops...
> 
> > Well, that is interesting.  I am quite confused how Makefile can get
> > generated without the parameter.  Can you suggest a patch?
> 
> I believe he meant that line 54 needs to have POLLUTE=1 too ...
> 

Got it.  Done.  I was confused between plperl and interfaces/perl.  I
assume plperl still does not work, right?

-- 
  Bruce Momjian                        |  http://www.op.net/~candle
  pgman@candle.pha.pa.us               |  (610) 853-3000
  +  If your life is a hard drive,     |  830 Blythe Avenue
  +  Christ can be your backup.        |  Drexel Hill, Pennsylvania 19026

  5. Re: perl 5.6.0 almost working!

    Tom Lane <tgl@sss.pgh.pa.us> — 2000-04-06T03:45:03Z

    Bruce Momjian <pgman@candle.pha.pa.us> writes:
> Got it.  Done.  I was confused between plperl and interfaces/perl.  I
> assume plperl still does not work, right?

Not for me ... but then I'm working on this tool-of-the-devil
HPUX OS ;-) ;-)

Has anyone else tried to use plperl?  Either success or failure
reports would be useful at this point.

			regards, tom lane

  6. Re: perl 5.6.0 almost working!

    John M. Flinchbaugh <glynis@butterfly.hjsoft.com> — 2000-04-06T05:12:17Z

    -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Wed, 5 Apr 2000, Bruce Momjian wrote:
> > it seems in src/interfaces/Makefile, the perl5/Makefile rule gets the
> > POLLUTE=1 option as necessary, which makes it work for make all, but
> > doing a ``make install'' uses the perl5-install, which does not build the
> > perl5/Makefile with POLLUTE=1. 
> Well, that is interesting.  I am quite confused how Makefile can get
> generated without the parameter.  Can you suggest a patch?

well this is what the block in src/interfaces/Makefile needs to look like
in the end:
...
perl5/Makefile: perl5/Makefile.PL
	cd perl5 && $(PERL) Makefile.PL POLLUTE=1

install-perl5: perl5/Makefile
	$(MAKE) -C perl5 clean
	cd perl5 && POSTGRES_HOME="$(POSTGRESDIR)" $(PERL) Makefile.PL POLLUTE=1
	$(MAKE) -C perl5 all
	-@if [ -w `sed -n -e 's/^ *INSTALLSITELIB *= *//p' perl5/Makefile` ]; then \
		$(MAKE) $(MFLAGS) -C perl5 install; \
		rm -f perl5/Makefile; \
	else \
		echo "Skipping install of Perl module for lack of permissions."; \
		echo "To install it, cd into interfaces/perl5, su to become the"; \
		echo "appropriate user, and do '$(MAKE) install'."; \
	fi

.PHONY: install-perl5
- ---

note the change from:
cd perl5 && POSTGRES_HOME="$(POSTGRESDIR)" $(PERL) Makefile.PL
to:
cd perl5 && POSTGRES_HOME="$(POSTGRESDIR)" $(PERL) Makefile.PL POLLUTE=1

thanks for you time.

____________________}John Flinchbaugh{______________________
| glynis@hjsoft.com         http://www.hjsoft.com/~glynis/ |
~~Powered by Linux: Reboots are for hardware upgrades only~~
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.0 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iEYEARECAAYFAjjsHLQACgkQCGPRljI8080/9gCdHqJv44OAWI+N8mEHr84IvgBH
1kcAnRiLAOAXyM4dZx0X2fDDr4kVG8hq
=PAi3
-----END PGP SIGNATURE-----

  7. Re: perl 5.6.0 almost working!

    John M. Flinchbaugh <glynis@butterfly.hjsoft.com> — 2000-04-06T05:16:06Z

    -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Wed, 5 Apr 2000, Bruce Momjian wrote:
> Got it.  Done.  I was confused between plperl and interfaces/perl.  I
> assume plperl still does not work, right?

that one seems to have been fixed already for beta4, so it works
wonderfully.

____________________}John Flinchbaugh{______________________
| glynis@hjsoft.com         http://www.hjsoft.com/~glynis/ |
~~Powered by Linux: Reboots are for hardware upgrades only~~
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.0 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iEYEARECAAYFAjjsHZoACgkQCGPRljI8081SlgCeJPWvuLB/tAJKf+/0qqV+GB5o
Q1oAn1+RaeSgMvFWRh+NrSK7QA/1970d
=OYIa
-----END PGP SIGNATURE-----

  8. Re: perl 5.6.0 almost working!

    John M. Flinchbaugh <glynis@butterfly.hjsoft.com> — 2000-04-06T05:18:35Z

    -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Wed, 5 Apr 2000, Tom Lane wrote:
> Has anyone else tried to use plperl?  Either success or failure
> reports would be useful at this point.

i've build the plperl.so without error, but i have not actually tested it
to see how it works.  i'm unfortunately unfamiliar with it at this
point.  i just wanted it to build, so i could someday learn it.
i'm using it with glibc 2.1.2, linux 2.2.12, intel pentium.

____________________}John Flinchbaugh{______________________
| glynis@hjsoft.com         http://www.hjsoft.com/~glynis/ |
~~Powered by Linux: Reboots are for hardware upgrades only~~
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.0 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iEYEARECAAYFAjjsHi8ACgkQCGPRljI8082FzgCeN5bBPEpSZEfDRCnOILl6XlXF
p/gAnjrY3Rj9kGOxCLoUBJnw+zMA5FOS
=zb/5
-----END PGP SIGNATURE-----

  9. Re: perl 5.6.0 almost working!

    Peter Eisentraut <e99re41@docs.uu.se> — 2000-04-06T13:20:46Z

    On Wed, 5 Apr 2000, Tom Lane wrote:

> Has anyone else tried to use plperl?  Either success or failure
> reports would be useful at this point.

Failure. (sparc-sun-solaris2.5.1)


Looks like this:
$ make
....
Running Mkbootstrap for plperl ()
chmod 644 plperl.bs
LD_RUN_PATH="" gcc -o blib/arch/auto/plperl/plperl.so  -G plperl.o
eloglvl.o SPI.o
/usr/sup/gnu/lib/perl5/sun4-solaris/5.00404/auto/Opcode/Opcode.so
-L../../../src/interfaces/libpq -lpq
/usr/sup/gnu/lib/perl5/sun4-solaris/5.00404/auto/DynaLoader/DynaLoader.a
-L/usr/sup/gnu/lib/perl5/sun4-solaris/5.00404/CORE -lperl -lsocket -lnsl
-lgdbm -ldl -lm -lc -lcrypt -ldb    
ld: fatal: library -ldb: not found
ld: fatal: File processing errors. No output written to
blib/arch/auto/plperl/plperl.so
make: *** [blib/arch/auto/plperl/plperl.so] Error 1

(There is indeed no libdb of any sort on this system AFAICT. I'm just a
pedestrian though, does anyone know what it is supposed to be for?)

That sure sounds like Perl once again trying to circumvent the autoconf
logic.

-- 
Peter Eisentraut                  Sernanders väg 10:115
peter_e@gmx.net                   75262 Uppsala
http://yi.org/peter-e/            Sweden

  10. Re: perl 5.6.0 almost working!

    Bruce Momjian <pgman@candle.pha.pa.us> — 2000-04-06T13:33:49Z

    Got it.   Thanks.


-- Start of PGP signed section.
> On Wed, 5 Apr 2000, Bruce Momjian wrote:
> > > it seems in src/interfaces/Makefile, the perl5/Makefile rule gets the
> > > POLLUTE=1 option as necessary, which makes it work for make all, but
> > > doing a ``make install'' uses the perl5-install, which does not build the
> > > perl5/Makefile with POLLUTE=1. 
> > Well, that is interesting.  I am quite confused how Makefile can get
> > generated without the parameter.  Can you suggest a patch?
> 
> well this is what the block in src/interfaces/Makefile needs to look like
> in the end:
> ...
> perl5/Makefile: perl5/Makefile.PL
> 	cd perl5 && $(PERL) Makefile.PL POLLUTE=1
> 
> install-perl5: perl5/Makefile
> 	$(MAKE) -C perl5 clean
> 	cd perl5 && POSTGRES_HOME="$(POSTGRESDIR)" $(PERL) Makefile.PL POLLUTE=1
> 	$(MAKE) -C perl5 all
> 	-@if [ -w `sed -n -e 's/^ *INSTALLSITELIB *= *//p' perl5/Makefile` ]; then \
> 		$(MAKE) $(MFLAGS) -C perl5 install; \
> 		rm -f perl5/Makefile; \
> 	else \
> 		echo "Skipping install of Perl module for lack of permissions."; \
> 		echo "To install it, cd into interfaces/perl5, su to become the"; \
> 		echo "appropriate user, and do '$(MAKE) install'."; \
> 	fi
> 
> .PHONY: install-perl5
> ---
> 
> note the change from:
> cd perl5 && POSTGRES_HOME="$(POSTGRESDIR)" $(PERL) Makefile.PL
> to:
> cd perl5 && POSTGRES_HOME="$(POSTGRESDIR)" $(PERL) Makefile.PL POLLUTE=1
> 
> thanks for you time.
> 
> ____________________}John Flinchbaugh{______________________
> | glynis@hjsoft.com         http://www.hjsoft.com/~glynis/ |
> ~~Powered by Linux: Reboots are for hardware upgrades only~~-- End of PGP signed section.


-- 
  Bruce Momjian                        |  http://www.op.net/~candle
  pgman@candle.pha.pa.us               |  (610) 853-3000
  +  If your life is a hard drive,     |  830 Blythe Avenue
  +  Christ can be your backup.        |  Drexel Hill, Pennsylvania 19026