Horton

Re: Synchronizing slots from primary to standby

shveta malik <shveta.malik@gmail.com>

View thread View on postgr.es
From: shveta malik <shveta.malik@gmail.com>
To: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Cc: Amit Kapila <amit.kapila16@gmail.com>, Peter Smith <smithpb2250@gmail.com>, "Hayato Kuroda (Fujitsu)" <kuroda.hayato@fujitsu.com>, Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>, Peter Eisentraut <peter.eisentraut@enterprisedb.com>, Bruce Momjian <bruce@momjian.us>, Ashutosh Sharma <ashu.coek88@gmail.com>, Andres Freund <andres@anarazel.de>, pgsql-hackers <pgsql-hackers@postgresql.org>, Ajin Cherian <itsajin@gmail.com>, Alvaro Herrera <alvherre@alvh.no-ip.org>, shveta malik <shveta.malik@gmail.com>
Date: 2023-10-27T08:51:56Z
Lists: pgsql-hackers 
On Wed, Oct 25, 2023 at 3:15 PM Drouvot, Bertrand
<bertranddrouvot.pg@gmail.com> wrote:
>
> Hi,
>
> On 10/25/23 5:00 AM, shveta malik wrote:
> > On Tue, Oct 24, 2023 at 11:54 AM Drouvot, Bertrand
> > <bertranddrouvot.pg@gmail.com> wrote:
> >>
> >> Hi,
> >>
> >> On 10/23/23 2:56 PM, shveta malik wrote:
> >>> On Mon, Oct 23, 2023 at 5:52 PM Drouvot, Bertrand
> >>> <bertranddrouvot.pg@gmail.com> wrote:
> >>
> >>>> We are waiting for DEFAULT_NAPTIME_PER_CYCLE (3 minutes) before checking if there
> >>>> is new synced slot(s) to be created on the standby. Do we want to keep this behavior
> >>>> for V1?
> >>>>
> >>>
> >>> I think for the slotsync workers case, we should reduce the naptime in
> >>> the launcher to say 30sec and retain the default one of 3mins for
> >>> subscription apply workers. Thoughts?
> >>>
> >>
> >> Another option could be to keep DEFAULT_NAPTIME_PER_CYCLE and create a new
> >> API on the standby that would refresh the list of sync slot at wish, thoughts?
> >>
> >
> > Do you mean API to refresh list of DBIDs rather than sync-slots?
> > As per current design, launcher gets DBID lists for all the failover
> > slots from the primary at intervals of DEFAULT_NAPTIME_PER_CYCLE.
>
> I mean an API to get a newly created slot on the primary being created/synced on
> the standby at wish.
>
> Also let's imagine this scenario:
>
> - create logical_slot1 on the primary (and don't start using it)
>
> Then on the standby we'll get things like:
>
> 2023-10-25 08:33:36.897 UTC [740298] LOG:  waiting for remote slot "logical_slot1" LSN (0/C00316A0) and catalog xmin (752) to pass local slot LSN (0/C0049530) and and catalog xmin (754)
>
> That's expected and due to the fact that ReplicationSlotReserveWal() does set the slot
> restart_lsn to a value < at the corresponding restart_lsn slot on the primary.
>
> - create logical_slot2 on the primary (and start using it)
>
> Then logical_slot2 won't be created/synced on the standby until there is activity on logical_slot1 on the primary
> that would produce things like:
>
> 2023-10-25 08:41:35.508 UTC [740298] LOG:  wait over for remote slot "logical_slot1" as its LSN (0/C005FFD8) and catalog xmin (756) has now passed local slot LSN (0/C0049530) and catalog xmin (754)
>
> With this new dedicated API, it will be:
>
> - clear that the API call is "hanging" until there is some activity on the newly created slot
> (currently there is "waiting for remote slot " message in the logfile as mentioned above but
> I'm not sure that's enough)
>
> - be possible to create/sync logical_slot2 in the example above without waiting for activity
> on logical_slot1.
>
> Maybe we should change our current algorithm during slot creation so that a newly created inactive
> slot on the primary does not block other newly created "active" slots on the primary to be created
> on the standby? Depending on how we implement that, the new API may not be needed at all.
>
> Thoughts?
>

I discussed this with my colleague Hou-San and we think that one
possibility could be to somehow accelerate the increment of
restart_lsn on primary.  This can be achieved by connecting to the
remote and executing pg_log_standby_snapshot() at reasonable intervals
while waiting on standby during slot creation. This may increase speed
to a reasonable extent w/o having to wait for the user or bgwriter to
do the same for us. The current logical decoding uses a similar
approach to speed up the slot creation.  I refer to usage of
LogStandbySnapshot in SnapBuildWaitSnapshot() and
ReplicationSlotReserveWal()).
Thoughts?

thanks
Shveta

Commits

  1. Doc: Add the new section "Logical Replication Failover".

  2. Fix the review comments and a bug in the slot sync code.

  3. Fix a test in failover slots regression test.

  4. Fix the intermittent buildfarm failures in 040_standby_failover_slots_sync.

  5. Split XLogCtl->LogwrtResult into separate struct members

  6. Ensure that the sync slots reach a consistent state after promotion without losing data.

  7. Introduce a new GUC 'standby_slot_names'.

  8. Fix BF failure introduced by commit b3f6b14cf4.

  9. Fixups for commit 93db6cbda0.

  10. Fix BF failure in commit 93db6cbda0.

  11. Add a new slot sync worker to synchronize logical slots.

  12. Improve ERROR/LOG messages added by commits ddd5f4f54a and 7a424ece48.

  13. Disable autovacuum on primary in 040_standby_failover_slots_sync test.

  14. Fix the incorrect format specifier used in commit 7a424ece48.

  15. Change the LOG level in 040_standby_failover_slots_sync.pl to DEBUG2.

  16. Add more LOG and DEBUG messages for slot synchronization.

  17. Another try to fix BF failure introduced in commit ddd5f4f54a.

  18. Fix BF introduced in commit ddd5f4f54a.

  19. Add a slot synchronization function.

  20. Clean-ups for 776621a5e4 and 7329240437.

  21. Enhance libpqrcv APIs to support slot synchronization.

  22. Add a failover option to subscriptions.

  23. Allow setting failover property in the replication command.

  24. Allow to enable failover property for replication slots via SQL API.

  25. Add macros for looping through a List without a ListCell.

  26. Track conflict_reason in pg_replication_slots.

  27. Allow upgrades to preserve the full subscription's state.

  28. Add support for incremental backup.

  29. Simplify some logic in CreateReplicationSlot()

  30. Fix uninitialized access to InitialRunningXacts during decoding after ERROR.

  31. Flexible options for CREATE_REPLICATION_SLOT.

  32. Empty search_path in logical replication apply worker and walsender.

  33. Fix oldest xmin and LSN computation across repslots after advancing

  34. Require C99 (and thus MSCV 2013 upwards).