Horton

Re: bad performance on irix

Luis Alberto Amigo Navarro <lamigo@atc.unican.es>

View thread View on postgr.es
From: "Luis Alberto Amigo Navarro" <lamigo@atc.unican.es>
To: <bruc@acm.org>
Cc: <bruc@acm.org>, <pgsql-hackers@postgresql.org>
Date: 2002-03-13T15:43:42Z
Lists: pgsql-hackers 
sorry, I thought i 've posted it before:

Processor 0: 196 MHZ IP25 
CPU: MIPS R10000 Processor Chip Revision: 2.5
FPU: MIPS R10010 Floating Point Chip Revision: 2.5
Processor 1: 196 MHZ IP25 
CPU: MIPS R10000 Processor Chip Revision: 2.5
FPU: MIPS R10010 Floating Point Chip Revision: 2.5
Processor 2: 196 MHZ IP25 
CPU: MIPS R10000 Processor Chip Revision: 2.5
FPU: MIPS R10010 Floating Point Chip Revision: 2.5
Processor 3: 196 MHZ IP25 
CPU: MIPS R10000 Processor Chip Revision: 2.5
FPU: MIPS R10010 Floating Point Chip Revision: 2.5
Processor 4: 196 MHZ IP25 
CPU: MIPS R10000 Processor Chip Revision: 2.6
FPU: MIPS R10010 Floating Point Chip Revision: 2.6
Processor 5: 196 MHZ IP25 
CPU: MIPS R10000 Processor Chip Revision: 2.6
FPU: MIPS R10010 Floating Point Chip Revision: 2.6
Processor 6: 196 MHZ IP25 
CPU: MIPS R10000 Processor Chip Revision: 2.6
FPU: MIPS R10010 Floating Point Chip Revision: 2.6
Processor 7: 196 MHZ IP25 
CPU: MIPS R10000 Processor Chip Revision: 2.6
FPU: MIPS R10010 Floating Point Chip Revision: 2.6
Main memory size: 1024 Mbytes, 2-way interleaved
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version WD33C95A, single ended, revision 0
  Tape drive: unit 4 on SCSI controller 0: DAT
  CDROM: unit 5 on SCSI controller 0
Integral SCSI controller 1: Version WD33C95A, differential, revision 0
  Disk drive: unit 1 on SCSI controller 1
  Disk drive: unit 2 on SCSI controller 1
  Disk drive: unit 3 on SCSI controller 1
  Disk drive: unit 4 on SCSI controller 1
Integral EPC serial ports: 4
Integral EPC parallel port: Ebus slot 5
Integral Ethernet controller: et0, Ebus slot 5
I/O board, Ebus slot 5: IO4 revision 1
VME bus: adapter 21
VME bus: adapter 0 mapped to adapter 21
EPC external interrupts

thanks and regards